Crochet Pattern Bunny Mommy Rattle
A simple crochet pattern Bunny Mommy rattle that even the most experienced beginner can crochet. The rattle has a good grip for children so they will hold it well. Ears are my “charming point” for children, don’t even they are cute, but children will love them during their teething time.
New to crochet? For more information about abbreviations, check out a full list on my post Crochet abbreviations and terms.
Crochet Bunny Mommy
Basic Feaures
The pattern uses the following:
- Yarn:
- Schachenmayr: Catania (Fingering weight yarn)
- 50 g – 125 m ; 1.75 oz – 137 yds
- 100% cotton
- Colors:
- C1: rosa No: 00246 (1 skein) for cone
- C2: creme No: 00130 (1 skein) for scoop
- Hook: 2.5 mm ; US=C/2 ; UK=12
- Safety eyes: 5 mm (1 pair)
- Polyester filling (fibrefill )
- Rattle: 2 cm diameter or smaller
- Others:
- embroidery needle or tapestry needle
- scissors
Finished Size:
- Height: 11 cm | 4.33″ tall
- Width: 5,5 cm | 2.165″
Notes
- This pattern is written in US terminology.
- For Amigurumi allways use a hook that is smaller than the size recommended for your yarn weight. This will ensure that your stuffing will not show through the stitches.
- All pieces are worked in the round. Use a stitch marker to indicate the beginning of each round.
- Invisible decreases are recommended.
- Safety eyes pose a choking risk for babies; therefore, if making this toy for a baby, I recommend using yarn, felt, or embroidered details.
- Body and head requires stuffing. Stuff as you work to ensure the piece is completely filled.
- Never leave a child unattended with this toy!
Abbreviations & Terms
Abbreviations
- beg – beginning
- C – color
- ch(s) – chain stitch(es)
- dec – decrease (2 scs together) (you can use usual ar invisible decrease)
- inc – increase (2 sc in same st) (you can use usual ar invisible increase)
- MR – magic ring, also known as magic circle
- R(s) – round(s)
- sc(s) – single crochet(s)
- sl st(s) – slip stitch(es)
- st(s) – stitch(es)
General Terms
- Number of round or row is in bold and in a color as R Number (example: R 1)
- Stitch(es) repetition is in round brackets with multiplication number, see: (…) x 2 – work everything in () as a group and then repeat it as many times as written in the pattern.
- All rows/rounds start in the same stitch as the chain or stitch at the beginning of the row/round.
- Join the round with slip stitch made into the first stitch of the round, slip stitch doesn’t count as a stitch unless otherwise stated.
- Total number of stitches in square brackets, in orange color [… ]
- An exclamation mark indicates a change or a crucial moment → !
- Changed text color indicates a crucial moment
- If the number of some stitches is written before the stitch, work ONE stitch into each of next NUMBER of stitches (example: 3 sc).
- If the number is written after the stitch you work those stitches into the same stitch (example: sc 3).
Don’t you want to read this pattern online?
We have a solution for you:
Bunny Mommy Pattern
Cute pattern of the Bunny Mommy as a rattle and a teether, as well. Your kids will love this crochet rabbit pattern easy you make, especially when their teeth come in. This is a DIGITAL PRODUCT! Please read the description below for more information.
Pattern Instructions
Overview
The toy is made of 5 parts in 2 colors:
- Body – color No.1
- Head – color No. 1
- Ears (2 pieces) – color No. 2
- Snout – color No. 2
Crochet Bunny Mommy Body
Body starts from the bottom.
R 1: Start with C1. Beg with MR with 6 scs, join the 1th sc with sl st [6]
If you need a quick refresher on this technique, click for a tutorial on How to Crochet a Magic Ring.
R 2: 6 incs [12]
R 2: ch, (1 inc) x 6, join the 1th sc with sl st [18]
R 4: ch, (2 scs, 1 inc) x 6, join the 1th sc with sl st [24]
R 5: ch, (3 scs, 1 inc) x 6, join the 1th sc with sl st [30]
R 6: ch, (4 scs, 1 inc) x 6, join the 1th sc with sl st [36]
R 7 – 15: 36 scs, join the 1th sc with sl st [36]
R 16: ch, (4 scs, 1 dec) x 6, join the 1th sc with sl st [30]
R 17 – 21: 30 scs, join the 1th sc with sl st [30]
R 22: ch, (3 scs, 1 dec) x 6, join the 1th sc with sl st [24]
R 23 – 27: 24 scs, join the 1th sc with sl st [24]
End with sl st, cut yarn leaving a long tail (approx. 40 cm | 16 inch) to attach the head to the body.
! Stuff bunny mommy body with filling !
I like to fill all crochet amigurumi toys little bit firmlier. That’s because I know that the filling, even if it’s lightened, will shift down over time. And, don’t forget, washing will beat the filling also together.
Head
Head starts from the top.
R 1: Start with C1. Beg with MR with 6 scs, join the 1th sc with sl st [6]
R 2: ch, (1 inc) x 6, join the 1th sc with sl st [12]
R 3: ch, (1 st, 1 inc) x 6, join the 1th sc with sl st [18]
R 4: ch, (2 scs, 1 inc) x 6, join the 1th sc with sl st [24]
R 5: ch, (3 scs, 1 inc) x 6, join the 1th sc with sl st [30]
R 6: ch, (4 scs, 1 inc) x 6, join the 1th sc with sl st [36]
R 7: ch, (5 scs, 1 inc) x 6, join the 1th sc with sl st [42]
R 8 – 12: 42 scs, join the 1th sc with sl st [42]
R 13: ch, (6 scs, 1 inc) x 6, join the 1th sc with sl st [48]
👉🏼 Insert safety eyes ! Insert them between R 9 and R 10.
I like to insert them in after 17th st and 25th st, so between eyes lay 8 sts.
Inset eyes from the top of the head between 9th and 10th row.
Make sure that the eyes are positioned at a 90 degree angle to the front axis.
👉🏼 If you do not have safety eyes, you can sew eyes on the same place as is described for safety eyes with a black yarn.
R 14 – 16: 48 scs, join the 1th sc with sl st [48]
R 17: ch, (6 scs, 1 dec) x 6, join the 1th sc with sl st [42]
R 18: ch, (5 scs, 1 dec) x 6, join the 1th sc with sl st [36]
R 19: ch, (4 scs, 1 dec) x 6, join the 1th sc with sl st [30]
👉🏼 Stuff head with filling ! In the middle of filling, insert rattle.
R 20: ch, (3 scs, 1 dec) x 6, join the 1th sc with sl st [24]
R 21: ch, (2 scs, 1 dec) x 6, join the 1th sc with sl st [18]
👉🏼 If needed, stuff head with some filling, to gain firm head !
R 22: ch, (1 scs, 1 dec) x 6, join the 1th sc with sl st [12]
End with sl st. Cut the yarn. There’s no need to leave a long tail. Insert left yarn tail into the head.
Bunny’s Ear (make 2)
Ear starts from the top.
R 1: Start with C2. Beg with MR with 6 scs, join the 1th sc with sl st [6]
R 2: 6 scs, join the 1th sc with sl st [6]
R 2: ch, (1 sc, 1 inc) x 3, join the 1th sc with sl st [9]
R 3: ch, (2 sc, 1 inc) x 3, join the 1th sc with sl st [12]
R 4: ch, (3 sc, 1 inc) x 3, join the 1th sc with sl st [15]
R 5: ch, (4 sc, 1 inc) x 3, join the 1th sc with sl st [18]
R 6: ch, (5 sc, 1 inc) x 3, join the 1th sc with sl st [21]
R 7: ch, (6 sc, 1 inc) x 3, join the 1th sc with sl st [24]
R 9 – 16: 24 scs, join the 1th sc with sl st [24]
R 17: ch, (6 sc, 1 dec) x 3, join the 1th sc with sl st [21]
R 18: ch, (5 sc, 1 dec) x 3, join the 1th sc with sl st [18]
R 19: ch, (4 sc, 1 dec) x 3, join the 1th sc with sl st [15]
R 20: ch, (3 sc, 1 dec) x 3, join the 1th sc with sl st [12]
R 21: ch, (2 sc, 1 dec) x 3, join the 1th sc with sl st [9]
End with sl st. Leave a long tail (approx. 30 cm | 12 inch) to sew ear to the head and, cut the yarn.
Snout
Snout starts from the center.
R 1: Start with C2. Beg with MR with 6 scs, join the 1th sc with sl st [6]
R 2: ch, (1 inc) x 6, join the 1th sc with sl st [12]
R 3: ch, 1 dec, 4 scs, (inc) x 2, 4 scs, 1 dec, join the 1th sc with sl st [12]
R 4: ch, 1 dec, 4 scs, (inc) x 2, 4 scs, 1 dec, join the 1th sc with sl st [12]
End with sl st. Leave a long tail (approx. 30 cm | 12 inch) to sew snout to the head and, cut the yarn.
Assembling
Assembling Body with Head
• You are going to sew the head together with the body.
• Join the head and body back to back. This is where the crochet rows join together.
• You will use the long tail of the body that you left after you finished crocheting.
• Sew 24 stitches around the body, and you will sew in the R 20, and R 21, you will use 24 gaps between sts.
You can watch videos How to attach Amigurumi Head to the body
Assembling Ears to the Head
- Sew the ears symmetrically between the 2ndand 5th row of the head on either side of the face.
Sew eaers from the top of the head between 2nd and 5th row.
Make sure that the ears are positioned in line with the eyes, at a 90 degree angle to the front axis.
Assembling Snout to the Head
Sew the snout between the 10th and 18th row of the head symmetrically between eyes.
Sew bunny’s snoutto the head between 10th and 18th row.
Make sure that the snout is positioned in line with the eyes, at a 90 degree angle to the front axis.
Embroidery
The Muzzle Embroidery
If you decided to embroider the muzzle, use pink yarn C1.
You need an estimate of about 50 cm of yarn.
You can decide whether to embroider the snout or not. Here is a comparison of how the bunny looks with and without the snout embroidered:
Watch video How to Embroidet the Bunny’s Muzzle
If you are interested in embroidering a muzzle, just watch this short video. During the video, you can decide whether you want to embroider just the muzzle or create a smile for the bunny as well.
Improve Bunny Mommy With a Belly
What do you think about Bunny Mommy Pattern?
Do you like this pattern? What do you think about the pattern? Let us know in
the comments below the post, we’d love to read them!
Did you make this project?
We would love to see what you have created so mention us @laliandjoli or tag us using #createdwithl&j so we can see your creations!
Save now, crochet later! 👇🏻
Copyright
Please be respectful of my work and do not modify, sell or share my patterns.
You can sell finished items made from this pattern if they are handmade by yourself in a limited number and you give credit to the designer. Please add the following text to your item description for any item designed by Hana Ráczová – Lali and Joli that you are selling:
„This product is handmade by [your name] from a design and pattern by Hana Ráczová at Lali and Joli. See www.laliandjoli.com for more information.“
Mass production using my patterns is not allowed.
COPYRIGHT ©Hana Ráczová – www.laliandjoli.com 2024 – ALL RIGHTS RESERVED WORLDWIDE
YOUR RIGHTS: This pattern Bunny Mommy and its content are restricted to your personal use only. It does not come with any other rights.
This pattern Bunny Mommy and its content are protected by international copyright law and may not be modified, compiled, combined with other content, copied, recorded, synchronized, transmitted, translated, formatted, distributed, publicly displayed, publicly performed, reproduced, given away, used to create derivative works and otherwise used or exploited (including for-profit) without the creator’s expressed permission. The creator retains full copyrights to this pattern Bunny Mommy and its content. Any portion of graphics, photography, elements or other creative content is the copyright of the respective owners and is used within the terms of license(s) and/or granted permission(s).
The creator has made every reasonable effort to be as accurate and complete as possible in the creation of this pattern Bunny Mommy and its content, and to ensure that the information provided is free from errors; however, the creator assumes no responsibility for errors, omissions, or contrary interpretation of the subject matter herein and does not warrant or represent at any time that the contents within are accurate due to the rapidly changing nature of the subject matter.
Any perceived slights of specific persons, peoples, or organizations are unintentional. Any product, website, and company names mentioned in this pattern Bunny Mommy and its content are the trademarks or copyright properties of their respective owners. The creator is not associated or affiliated with them in any way. Nor does the referred product, website, and company sponsor, endorse, or approve this pattern Bunny Mommy and its content.
